Toshiba Magnia 3310 User Manual download pdf (Page 93)

Installing and Removing Hardware

Memory module

Your server can accommodate a maximum of six 128 MB,

256 MB, 512 MB, 1 GB or 2 GB DDR memory modules with the

ECC (Error Correction Control) which operate at clock frequency

of 266 MHz. When using a memory module that has more than

512 MB, it is possible to correct errors up to a maximum of 4 bits

through the Chipkill function.

When installing additional memory modules, use two memory

modules of the same capacity. Two memory modules of up to two

different capacities can be installed. Memory can be expanded up

to 12GB.

NOTE:

About Memory Space:

In combinations of PCI bus and IA-32 architecture typified by

Xeon and Pentium II/III/4, an area that cannot be used as

main memory is formed directly under memory address 4GB.

For this reason, all memory cannot be used as main memory

even if 4GB or upper memory is mounted.

This problem sometimes causes less memory to be dis-

played in the startup screen and OS display than the actually

mounted memory.

When installing additional memory modules, start from the top

memory slot in numerical order, namely from the slot 1B and slot

1A first, the slot 2B and slot 2A second, the slot 3B and solt 3A

last. Memory modules are installed in pairs.

When installing memory modules with different capacities, insert

them from the slots 1B and 1A in order of increasing capacity, that

is, the memory module with the smallest capacity in the slot 1B

and 1A.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 256 257

No comments

Toshiba Magnia 3310 User Manual Page 93