Toshiba IK-DP20A User Manual download pdf (Page 17)

4) It is recommended to set privacy zone bigger than actual masking area.

5) During turbo panning or tilting, the privacy zone may shift depending on the location

of the zone.

6.5 PAN/TILT SETUP

6.5.1 AUTO FLIP

The Auto Flip feature allows the tilt to rotate 180 degrees and reposition itself for

continuous viewing of a moving object directly beneath the dome.

To enable AUTO FLIP:

1. Enter 95 preset to access the main menu.

2. Position the cursor (->) next to PAN/TILT SETUP and press the OPEN button to

access the Pan/Tilt menu.

3. Position the cursor next to AUTO FLIP and press the OPEN button to move the

cursor to the right.

4. Move the joystick up or down to select ON or OFF.

5. To accept the selection, press the OPEN button or to cancel the selection, press

the CLOSE button.

6.5.2 PROPORTIONAL P/T

Proportional P/T controls the pan and tilt speeds according to the amount of zoom.

At telephoto settings, the pan and tilt speeds will be slower to keep the image from

moving too fast on the monitor.

To enable PROPORTIONAL P/T:

1. Enter 95 preset to access the main menu.

2. Position the cursor (->•) next to PAN/TILT SETUP and press the OPEN button to

access the Pan/Tilt menu.

3. Position the cursor next to PROPORTIONAL P/T and press the OPEN button to

move the cursor to the right.

4. Move the joystick up or down to select ON or OFF.

5. To accept the selection, press the OPEN button or to cancel the selection, press

the CLOSE button.

6.5.3 SCAN LIMIT STOPS

When a Scan Limit Stop is reached during random, frame or auto scan, the dome

camera will reverse direction. A Left Scan Limit Stop and Right Scan Limit Stop can

be set. The limit stops must be greater than 10 degrees apart.

16-

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Toshiba IK-DP20A User Manual Page 17