Toshiba IK-DP20A User Manual download pdf (Page 22)

6.7 OTHERS MENU

6.7.1 POWER UP

During Power-Up, the dome camera can be set to start in various modes.

PARK: The dome camera will move to Preset 1 position.

AUTO SCAN: The dome camera will perform an auto scan operation.

FRAME SCAN: The dome camera will perform a frame scan operation.

RANDOM SCAN: The dome camera will perform a random scan operation.

AUTO PATROL: The dome camera will perform an auto patrol operation.

DEFAULT: The dome camera will move to the mechanical reset point.

MAIN MENU

TITLE MENU

GROWER UP PARK

FREEZE ACTIVITY ON

-------

LOAD FACTORY DEFAULT

-><OTHERS>

EXIT

TILT ANGLE INDOOR

To set POWER UP MODE:

1. Enter 95 preset to access the main menu.

2. Position the cursor (^) next to OTHERS and press the OPEN button to access the

menu.

3. Position the cursor next to POWER UP and press the OPEN button to move the

cursor to the right.

4. Move the joystick up or down to set the power up mode.

5. To accept the selection, press the OPEN button or to cancel the selection, press the

CLOSE button.

6.7.2 FREEZE ACTIVITY

During frame scan, random scan or auto patrol, a stop time from 10 sec to 60 sec can

be set. During scanning, the camera will not move for the specified time at each stop.

-21 -

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Toshiba IK-DP20A User Manual Page 22