Toshiba IK-DP20A User Manual download pdf (Page 20)

3. Position the cursor next to SCAN SPEED and press the OPEN button to move the

cursor to the right.

4. Move the joystick up or down to set the speed.

5. To accept the selection, press the OPEN button or to cancel the selection, press

the CLOSE button.

6.5.8 SCAN TILT ANGLE

The tilt angle of the dome camera for auto scan, random scan and frame scan can be

set from 0 to 85 degrees or 92 degrees (0 degree is straight down).

To set SCAN TILT ANGLE:

1. Enter 95 preset to access the main menu.

2. Position the cursor (->) next to PAN/TILT SETUP and press the OPEN button to

access the PanTTilt menu.

3. Position the cursor next to SCAN TILT ANGLE and press the OPEN button to move

the cursor to the right.

4. Move the joystick up or down to set the tilt angle.

5. To accept the selection, press the OPEN button or to cancel the selection, press the

CLOSE button.

6.5.9 STOP TIME

During frame scan, random scan or auto patrol, a stop time from 10 sec to 60 sec can

be set. During scanning, the camera will not move for the specified time at each stop.

To set STOP TIME:

1. Enter 95 preset to access the main menu.

2. Position the cursor (->) next to PAN/TILT SETUP and press the OPEN button to

access the Pan/Tilt menu.

3. Position the cursor next to STOP TIME and press the OPEN button to move the

cursor to the right.

4. Move the joystick up or down to set the stop time.

5. To accept the selection, press the OPEN button or to cancel the selection, press

the CLOSE button.

B.5.10MAX SPEED

The maximum speed of Pan/Tilt functions can be set from 30 degrees/sec to 300

degrees/sec. The max speed controls global Pan/Tilt speeds. To reduce rotation

loise, a lower speed is recommended.

-19-

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Toshiba IK-DP20A User Manual Page 20