Toshiba IK-TU40A User Manual

TOSHIBAINSTRUCTION MANUAL3 CCD COLOR CAMERAIK-TU40AINFORMATIONThis equipment has been tested and found to comply with the limits for a C

6. OPERATION© Referring to the item '"5. CONNECTION", connect each equipment correctly.® Turn on the connected equipment and the camer

ATW(Automatic Trace White balance)AWB(Automatic White Balance)MANU(Manual White Balance)FeaturesTraces variations of color temperature and adjusts the

MANU• Set the [WB] switch to MANU.• Shoot a known object, adjust the white balance using the white balance adjusting controls with a screwdriver, co

Push the [MENU UP] button for approx. 1 second.When the automatic shading correction operation starts, the character SHD blinks.When the automatic

7. MODE SETTING BY ON SCREEN DISPLAYVarious settings can be controlled on the camera by using the on screen menu displayed on the mon

15

• Select the menu to change the setting by referring the item "7.1 Using the Menu".)• When the [MENU UP], [MENU DOWN] buttons are pushed,

(b) Changing the automatic shutter detection (ratio between peak and average value)® Set the to PEAK/AVE by pushing [MENU UP], [MENU DOWN] buttons.®

(1.2) Changing each setting in MANU modeShutter mode (AUTO, MANU, SS, 1 PULSE) Shutter spdde settingOFF, 1/100S, 1/250S, 1/500S, 1/1000S,1/2000S, 1/40

(b) Changing CCD storage mode© Set the to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.@ Select either FLD (field) or FRM (frame) by pushing [DA

TABLE OF CONTENTS1. COMPONENTS...

(2.2) MANU (manual) mode menu--- 2 GAIN --MODE MANUGAIN 18dB^[GAIN] switch positionManual gain display (0 ~ 18 dB, 1 dB step)The GAIN set by the GA

(a) Changing AWB offset (tint)© Set the to OFFSET by pushing [MENU UP], [MENU DOWN] buttons. ® Set the offset amount by pushing [DATA UP], [DATA DOWN

C4) PROCESS (Process)Move up and down by pushing MENU UP, DOWNSet by pushing DATA UP, DOWN.A-- 4 PROCESS^GAMMA ON/OFF GAMMABLACK GAMMA 2D LPF DTL GAI

(4.3) Changing black gamma correction level® Set the to BLACK GAMMA by pushing [MENU UP], [MENU DOWN] buttons. © Select black gamma corre

(4.7) Changing master pedestal® Set the to M. PED by pushing [MENU UP], [MENU DOWN] buttons. (D Set the master pedestal by pushing [DATA UP], [DATA D

(a) Adjusting horizontal phase© Set the to H PHASE by pushing [MENU UP], [MENU DOWN] buttons. (D Adjust the horizontal phase by pushing [DATA UP], [D

(6.2) Changing OUTPUT 2 output© Set the to OUTPUT 2 by pushing [MENU UP], [MENU DOWN] buttons.® Select either VBS or Y/C by pushing [DATA UP], [DATA

(D Move the "o" to the zone to be appeared.The display "o" moves up, down, left and right by pushing [MENU UP], [MENU

(2) External sync frequency rangeFor NTSC standard frequency: Within ±50ppm(3) Using the camera with external sync signalAdjust H (horizontal) ph

When the exposure period is over SYNC interval.Trigger pulse (Trigger)Video outputJLExposure periodITIndex output (INDEX)H: 4 ~ 5V L: Less than 0.5V

(5) SYNC (sync) ...24(5.1) INT screen

8. CAUTIONS ON USE AND INSTALLATIONCarefully handle the units.Do not drop or give a strong shock or vibration to the camera. This may cause p

10. EXTERNAL APPEARANCE DIAGRAMUnit: mm [inch][1.58]37.2[^^6][0.26]31

1. COMPONENTS(1) Camera head (without lens, protection cap attached)...1(2) Camera control unit...

Remote interface:Serial data interface (RS-232C standard)Option (Optional parts)EXC-T406 (Camera cable 21'10" (6.5m)) EXC-T403 (Camera cable

4. NAMES AND FUNCTIONS® Prism faceplateFrontf—1' Lens mount (3) Cameracable terminalSide Rear® Mounting screwsBottomOhmm« <&iMriNral Ita

© Prism faceplate® Lens mount @ Camera cable terminal ® Mounting screws® None® Camera cable terminal ® POWER LED ® POWER switch ® FILE switch ® W.B. s

5. CONNECTIONS.1CoaxialDC power supplyWhen connecting the camera cables, be sure to turn off the camera control unit and the other equipm

UP 8lNBMElfc[ VNOMHMIf^Back panel viewStt3Jk CkMMMMdhMiF Mfatt iDC IN 12VDC IN/SYNCS-VIDEO1+ 12V2+ 12V3 GND4GND1 GND2+12V3GND (for INDEX)4 INDEX5 GN