Toshiba Satellite M40 (PSM40) User Manual Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 201
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
User’s Manual 3-8
Getting Started
Benefits of hibernation
The hibernation feature provides the following benefits:
Saves data to the hard disk when the computer automatically shuts
down because of a low battery.
You can return to your previous working environment immediately when
you turn on the computer.
Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the System
hibernate feature.
You can use the panel power off feature.
Starting Hibernation
To enter Hibernation mode, follow the steps below.
Windows XP
1. Click Start.
2. Select Turn Off Computer.
3. Open the Turn Off Computer dialog box.
Hibernate
is not displayed.
4. Press the Shift key. The
Standby
item will change to
Hibernate
.
5. Select Hibernate.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press the
power button or close the lid. First, however, make the appropriate settings
according to the steps below.
1. Open the Control Panel.
2. Open Performance and Maintenance and open Power Options.
3. Select the Hibernate window in the Power Options Properties, select the
Enable hibernation check box and click the Apply button.
4. Open TOSHIBA Power Saver.
5. Select the Setup Action window.
6. Enable the desired Hibernation settings for When I slide the power button
and When I close the lid.
7. Click the OK button.
For the computer to shut down in hibernation mode, the hibernation feature
must be enabled in two places: the Hibernate tab in Power Options and
Setup Action tab in TOSHIBA Power Saver. Otherwise, the computer will
shut down in Standby mode. If battery power becomes depleted, data
saved in Standby mode will be lost.
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 200 201

Comments to this Manuals

No comments