Toshiba Satellite M40 (PSM40) User Manual Page 178

  • Download
  • Add to my manuals
  • Print
  • Page
    / 201
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 177
User’s Manual C-3
Wireless LAN
Supported frequency sub-bands
Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels.
Consult your Authorised Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.
Wireless IEEE 802.11 Channels Sets (Revision B and G)
Wireless IEEE 802.11 Channels Sets (11G Turbo Mode)
When installing Wireless LAN cards, the channel configuration is managed
as follows:
For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Frequency Range Channel ID 2400-2483.5 MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457*1
11 2462
12
2467
*2
13
2472
*2
Frequency Range Channel ID 5150-5850 MHz Note
6 2437
US only
*4
Page view 177
1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 200 201

Comments to this Manuals

No comments