Toshiba MK6017MAP User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 126
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
360014937
Copyright © 2000 Toshiba corporation. All rights reserved.
-
563 -
sector data from the host to the media. After transferring the last data in the buffer, it sets BSY and issues an
Interrupt.
10.8.10 Format Track
9
(50h)
COMMAND CODE
0 1 0 1 0 0 0 0
REGISTER
REGISTER SETTING NORMAL COMPLETION
DR drive no. no change
CY cylinder to format no change
HD head to format no change
SN 01H
SC 00H
FT no change
The track specified by the task file is formatted with ID and data fields according to the table transferred to
the buffer. This command is rejected in LBA mode with an Aborted command error reported.
DRQ in status register is set as soon as the command register is written, and the buffer RAM receives the
data transferred from the host. After 512 bytes are transferred into the buffer RAM, the drive resets DRQ,
sets BSY and begins format operation. The drive seeks to the target cylinder if the head is not on the target
track ( implied seek ). After completion of the command, it resets BSY and generates an interrupt.
Format table consists of the number of sectors ( 16 bits ) per track . Upper byte represents sector number,
and lower byte represents format type.
The drive supports only 00H format type. Intending to maintain compatibility with previous models, the drive
accepts any format type, but the function will not change.
Sector interleave is always set to one regardless of sector sequence in the format table. Data subsequent
to
format table are handled as “Don't care”.
FORMAT TABLE ( FIRST 86 BYTES )
(Ex. 43 logical sector mode)
0001, 0002, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0013, 0015, 0016, 0017, 0018,.0019,
001A,.......0029, 002A, 002B
DON’T CARE ( 426 BYTES ATTACHED )
0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, ........... 0000, 0000, 0000.
9
ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3, and the previous
models compatibility. User is recommended not to use this command.
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 125 126

Comments to this Manuals

No comments