Toshiba IK-WB30A User Manual download pdf (Page 78)

Transparent HTTP Tunnel: If you want to use your own RS-485 device, you can use UART commands to

build a Transparent HTTP Tunnel. The UART commands will be sent through HTTP tunnel established

between the RS-485 device and the linked camera. For detailed application notes, please refer to URL

Command Guide.

Preset Positions

If you select the PTZ driver and click the Save button, the Preset Position button will be enabled. Click

Preset Position to open the settings page. You can also select preset positions for the camera to patrol.

A total of 20 preset positions can be conﬁgured.

Please follow the steps below to preset a position:

1. Adjust the shooting area to the desired position using the buttons on the right side of the window.

2. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the

settings. The preset positions will be displayed under the Preset Location list on the left-hand side.

3. To add additional preset positions, please repeat steps 1~2.

4. To remove a preset position from the list, select it from the drop-down list and click Delete.

5. The preset positions will also displayed on the main page. Please refer to the illustration on the next

page.

6. Click Save to enable the settings.

2010/01/15 18:33:33

Functions are the same

as the Control Panel on

the home page

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 120 121

No comments

Toshiba IK-WB30A User Manual Page 78