Toshiba Satellite P100 (PSPAD) User Manual download pdf (Page 99)

User’s Manual 6-13

Power and Power-Up Modes

Starting the computer by password

If you registered a password, start the computer by entering the password

manually.

To enter a password manually, follow these steps:

1. Turn on the power. The following message will appear:

Enter Password [xxxxxxxx]

2. Enter the Password.

3. Press Enter.

Power-up modes

The computer has three power-up modes:

■ Hibernation (saves data in memory to the hard disk)

■ Sleep Mode (Power remains on, saving data in RAM, but the CPU and

all other devices enter sleep mode.)

■ Boot (does not save data in memory)

Panel power off/on

In AC mode, this feature turns power to the computer off when the display

panel is closed and turns it back on when the panel is opened.

In Battery mode, the Hibernation feature turns power to the computer off

when the display panel is closed and cannot turn it back on when the panel

is opened. The Sleep Mode turns power to the computer off when the

display panel is closed and turns it back on when the panel is opened.

The password is necessary only if the computer was shut down in boot

mode, not in Hibernation or Sleep Mode.

If you enter the password incorrectly three consecutive times, the

computer shuts down. You must turn on the computer again and re-enter

the password.

Refer also to the section Turning off the power in Chapter 3, Getting

Started.

If the panel power off function is enabled and you use Shut down

Windows, do not close the display until the shut down function is

completed.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 169 170

No comments

Toshiba Satellite P100 (PSPAD) User Manual Page 99