Toshiba Satellite P100 (PSPAD) User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
User’s Manual 4-7
Operating Basics
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer’s LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Wireless communications
The computer’s wireless communication function supports both Wireless
LAN and Bluetooth devices.
Only some models are equipped with both Wireless LAN and Bluetooth
functions.
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with
the 802.11b/g or 802.11a/b/g wireless LAN standard.
It supports the following:
Automatic Transmit Rate Select mechanism in the transmit range of 54,
11, 5.5, 2 and 1 Mbit/s.
Advanced Encryption Standard (AES) data encryption, based on 128bit
encryption algorithm.
Frequency Channel Selection (5GHz and 2.4 GHz)
Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a
microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.
Turn Wi-Fi and Bluetooth functionalities off when near a person who may
have a cardiac pacemaker implant or other medical electric device.
Radio waves may affect pacemaker or medical device operation,
possibly resulting in serious injury. Follow the instruction of your medical
device when using any Wi-Fi or Bluetooth functionality.
Always turn off Wi-Fi or Bluetooth functionality if the computer is near
automatic control equipment or appliances such as automatic doors or
fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.
It may not be possible to make a network connection to a specified
network name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable network
connections.
* Please be sure to use new network name.
Wake-up on LAN does not function on a Wireless LAN.
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 169 170

Comments to this Manuals

No comments