Toshiba Satellite P100 (PSPAD) User Manual Page 112

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 111
8-8 User’s Manual
Optional Devices
Installing a memory module
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery (refer to
Chapter 6, Power and Power-Up Modes).
4. Loosen the two screws securing the Memory Module Slot cover.
5. Slide your fingernail or a thin object under the cover and lift it off.
Removing the Memory Module Slot cover
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
Do not try to install a memory module under the following conditions. You
can damage the computer and the module.
a. The computer is turned on.
b. The computer was shut down in Sleep mode.
Page view 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 169 170

Comments to this Manuals

No comments