Toshiba Tecra 8100 User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 226
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
User's Manual Optional Devices 8-15
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual 8100_UK.DOC ENGLISH Printed on 13/12/99 as
IM8100UK
If you have selected
Simultaneous
under the
Display
options of the
Hardware Setup or TSETUP program, both the external monitor and the
internal LCD will be active when you turn on the computer. If
Auto-Selected
is chosen, only the external monitor will be active.
To change the display settings, press
Fn + F5
. If you disconnect the
monitor before you turn the computer off, be sure to press
Fn + F5
to
switch to the internal display. Refer to Chapter 5, The Keyboard, for
details on using hotkeys to change the display setting.
Simultaneous
display will not work if the external monitor, or other
device such as a projector, supports only VGA mode (640 x 480). This is
because the computer operates in the higher resolution Super VGA (800 x
600) or XGA (1024 x 768). In this case, choose
Auto-Selected
in
Hardware Setup or press
Fn + F5
to switch to the external display.
Television
A television can be connected to the video out port on the computer. To
connect a television, follow the steps below. Also refer to Chapter 7,
TSETUP and Passwords, for details on setting the type of TV signal and
selecting the television as an output device.
1.
Turn the computer off.
2.
Use a composite video cable to connect the television to the video out
port.
Connecting a television
3.
Turn the television on.
4.
Turn the computer on.
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 225 226

Comments to this Manuals

No comments