Toshiba Qosmio G50 User Manual download pdf (Page 140)

7-6 User’s Manual

Qosmio G50

CPU

This function allows you to set the processor’s operating mode.

Dynamic CPU Frequency Mode

This option allows you to configure the power saving modes associated

with the processor - the following settings are available:

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on when it receives a

wake-up signal from the LAN.

Power will be automatically turned on when a signal is received from an

administrator’s computer which is connected via a network.

The following settings can be changed when the Built-in LAN is Enabled.

Connect the AC adaptor when using the Wake-up on LAN function. The

battery retention time will be shorter than the times listed in this manual

when this function is enabled. Refer to the section in chapter 6, Retaining

data with power off.

Dynamically

Switchable

The processor’s power consumption and

automatic clock speed switching functions are

enabled - in use the processor’s operation is

automatically switched when necessary (default).

Always High The processor’s power consumption and

automatic clock speed switching functions are

disabled - in use the processor will always run at

its highest level of power consumption and its

highest speed.

Always Low The processor’s power consumption and

automatic clock speed switching functions are

disabled - in use the processor will always run at

a lower level of power consumption and a low

speed.

Do not install or remove a memory module while Wake-up on LAN is

enabled.

The Wake-up on LAN function consumes power even when the system is

off. Leave the AC adaptor connected while using this feature.

Enabled Enables Wake-up on LAN (Default).

Disabled Disables Wake-up on LAN.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 249 250

No comments

Toshiba Qosmio G50 User Manual Page 140