Toshiba Magnia Z300 User Manual download pdf (Page 188)

System Configuration Setup

Configuring MegaRAID IDE

166

Drive numbers of the physical drives included in the array

Stripe size (32 KB to 4 MB) which is valid for Stripe configu-

rations only

Whether the system is bootable from one of the configured

arrays

Build Array function, which is valid for Mirror array. This

option is used to build one drive from another.

Physical Drive Information

This section displays all the physical drives connected to the IDE

channels and their properties. The arrow keys<↑> and <↓> are

used to navigate the Physical Drive Information window. The

menus are as follows:

Channel ID (Primary or Secondary)

Connection ID (Master or Slave)

Disk array that the physical drive is a part of

Model number

Firmware Rev# (firmware version of each drive)

Size in MB of each drive

The status of each drive (online, failed, or rebuilding)

NOTE: Information listed in the Physical Drive Information

window cannot be edited. Only the <TAB>, <↑>, and <↓>

keys will work when the control is in the Physical Drive Infor-

mation window.

Physical Drive Options

In the top right corner of the Physical Drive Information are the

physical drive options. The available options are as follows:

Enable/Disable write cache

1 ... 187 188 189 ... 272

No comments

Toshiba Magnia Z300 User Manual Page 188