Toshiba Magnia 3030 User Manual download pdf (Page 236)

218

Hardware setup information

Perform the following operations if the hardware setup information is to be

forcibly returned to the standard settings (defined data):

1 Start the server after setting the required jumper switch on the mother board

of the server to “Clear”.

J2J1: 2-3 Clear ... Clears the hardware data settings.

1-2 Protect ... Standard (Defined data)

When existing data is cleared, the following message will be dis-

played:

2 Shut down the server, then turn power off, and return the switch to “Pro-

tect”.

Start the system setup utility (SSU) and the BIOS setup utility and enter

data different from the recommended settings.

Note: The standard settings displayed after the original data has been

cleared are the initial data of the mother board, and they differ from the

defaults (recommended settings).

When the original data is cleared, data settings on the onboard SCSI con-

troller will also be cleared.

Settings on the EMP function are not returned to the standard settings.

Note: Before clearing information, remove all expantion cards.

Enabling/disabling the Wake On LAN feature

The Wake On LAN feature can be made valid or invalid by setting the required

jumper switch.

J5A2: 2-3 Enable ... Makes the Wake On LAN feature valid.

1-2 Disable ... Makes the Wake On LAN feature

invalid (defined value).

[8150: NVRAM Cleared by Jumper

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 242 243 244

No comments

Toshiba Magnia 3030 User Manual Page 236