Toshiba Pocket PC e800 User Manual download pdf (Page 98)

User’s Manual 7-4

Getting Connected

Connect to Work

If you have access to a network at work, you can send email messages,

view intranet pages, synchronize your device, and possibly access the

Internet. You can connect to work in one of two ways:

■ Create a modem connection by using a RAS account. Before you can

create this modem connection, your network administrator will need to

set up a RAS account for you. If this is the method you want to use, see

“To create a modem connection to a network”. Your network

administrator may also give you VPN settings.

■ Use an Ethernet card and a net tap to connect to the network. If this is

the method you want to use, see “To create an Ethernet connection to a

network”.

To create a modem connection to a network

1. Get the following information from your network administrator: dial-up

access telephone number, user name, password, domain name, and

TCP/IP settings.

2. If your device does not have a built-in modem, install a modem card.

3. Tap , Settings, Connections and then tab Connections.

4. In My Work Network, tap Add a new modem connection, and follow

the instructions in the New Connection wizard.

5. Enter a name for the connection, such as your company's name.

6. In the Select a modem list, tap your modem type. If you are using any

type of external modem, in the Select a modem list, select the modem

by name. If a listing does not exist for your external modem, tap Hayes

Compatible on COM1.

7. Enter the phone number exactly as you want it dialed. If you know part

of the phone number will change frequently as you travel, use dialing

rules to avoid creating numerous modem connections for the same

phone number.

8. Enter your user name, password, and domain name as provided by

your network administrator. If a domain name was not provided, try the

connection without entering a domain name.

9. You should not need to change any advanced settings. Instances where

you will want to change advanced settings include:

■ You want to change baud rate settings, dialing string commands, or

credit card options.

■ You need to change port settings.

■ The server you are connecting to does not use dynamically-

assigned addresses, and you need to enter your TCP/IP settings.

To change advanced settings, tap Advanced. Otherwise, tap Finish.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 222 223

No comments

Toshiba Pocket PC e800 User Manual Page 98