Toshiba W1443 User Manual download pdf (Page 10)

English - 10 -

English

Connecting an HDMI

or DVI Device to the HDMI Input

The HDMI inputs on your TV receive digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

These inputs are designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital form

from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI

or DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI

terminal. For proper operation, it is recommended that you

use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or

your TV is capable of refresh rates greater than 50Hz, you

will need a Category 2 cable. Conventional HDMI/DVI cable

may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press “SOURCE -

”

button to select the appropriate HDMI input.

HDMI Input

Socket

(Back)

HDMI device

D IH M 1

D IH M 2

* Number of

these inputs

may change

according to

the model of

your TV.

CEC

CEC operation is available if a CEC device is present. This

feature is limited to Toshiba disc players that support CEC.

Press and hold the “0-Zero” button on the remote control for

3 seconds to terminate CEC operation and control the TV

via the remote again.

To Connect a DVI Device

Connect an HDMI-to-DVI cable (HDMI type A connector) to the

HDMI input socket and audio cables to the RED and WHITE

SIDE AV AUDIO inputs on the Audio/Video connection cable

supplied (see illustration).

• The maximum recommended HDMI-to-DVI cable length

is 6.6 ft (2m).

• An HDMI-to-DVI cable transfers video only. Separate

analogue audio cables are required.

D IH M 1

D IH M 2

HDMI to DVI Cable

(not supplied)

Video Transfer

Audio Cable

(not supplied)

Audio Transfer

HDMI Input

Sockets

SIDE AV Input

Side Audio/Video

Connection Cable

(supplied)

Match

Colours

* Number of

these inputs

may change

according to

the model of

your TV.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

TV rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device rst, and then the TV.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments

Toshiba W1443 User Manual Page 10

Comments to this Manuals

Related products and manuals for Monitors Toshiba W1443