Toshiba UL985 User Manual Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
85
CONTROLS AND FEATURES
English
When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.
a In the Preferences menu, press B or b to select AV
Connection and press OK.
b Press B or b to select Digital Audio Output.
c Press OK to display Digital Audio Output menu and
press
B or b to select an option.
Audio Format
Press
C or c to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket.
Dolby Digital
S Dolby Digital
Dolby Digital Plus
S Dolby Digital
MPEG
S PCM
HE-AAC
S Dolby Digital
Audio Delay
Press
C or c to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
Press
C or c to adjust the audio signal timing
(0 – 250ms) to meet the video signal timing.
NOTE:
This feature is grayed out when Audio Delay is in
Auto.
A time lag will occur when the video signal or audio
signal is changed. Adjust the timing accordingly.
When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
Depending on the connected equipment (amplifier,
etc.), adjustment may not be possible.
When the optical digital output setting (Auto
t
PCM) is
changed, it may be necessary to adjust the timing again.
Do not use other than for audio output from the AV
amplifier, etc. (Malfunction may occur)
Using HDMI CEC Control
This is a new feature that uses CEC technology and
allows you to control Toshiba HDMI CEC Control
compatible devices from the television remote
control via HDMI connection (page 11).
When the Enable HDMI CEC Control item in the HDMI CEC
Control Setup menu is set to On, individual functions also set
to On will be activated.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight Preferences icon and
press OK.
c Press B or b to select HDMI CEC Control Setup and
pres OK.
d Press b to select Enable HDMI CEC Control and
press
C or c to select On.
NOTE: If you set Enable HDMI CEC Control to Off, all
other items will be grayed out.
The TV Auto Power setting allows the television to be
automatically switched on if a HDMI CEC Control device is turned
on.
a In the HDMI CEC Control Setup menu, press b to
highlight TV Auto Power.
b Press C or c to select On or Off.
When Auto Standby is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
HDMI CEC Control equipment.
a In the HDMI CEC Control Setup menu, press b to
highlight Auto Standby.
b Press C or c to select On or Off.
Digital Audio Output
AV Connection
Input Labeling
Digital Audio Output
Enable HDMI CEC Control
TV Auto Power
Auto Standby
HDMI CEC Control Setup
Enable HDMI CEC Control
On
TV Auto Power On
Auto Standby On
Amplifier Control On
Initial Speaker Setting TV Speakers
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 101 102

Comments to this Manuals

No comments