Toshiba P55-A5200 User's Guide download pdf (Page 48)

Getting Started

Adding memory (optional)

Installing a memory module

Memory modules can be installed in the memory module

slots on the underside of the computer. You will need a small

Phillips screwdriver for this procedure.

If the computer has been running recently, the memory

module(s) may be hot. The surrounding area may also be

hot. Allow the module(s) to cool to room temperature

before replacing it. Avoid touching the cover, the

module(s), and the surrounding area before they have

cooled. Failure to follow these directions could result in

minor bodily injury.

To avoid damaging the computer’s screws, use a small

Phillips screwdriver that is in good condition.

Installing a memory module with the computer’s power

on may damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You

can install one or two memory modules.

Before you install or remove a memory module, turn off

the computer. If you install or remove a memory module

while the computer is in Sleep or Hibernation mode, data

will be lost.

For this model, Slot A is the bottom slot. Slot B is the top

slot. If only one memory module is to be installed, it must

be installed in Slot A.

If the computer is on, begin at step 1; otherwise, skip to step 5.

1 From the Start or Desktop screen, move your pointer to

the upper-right corner of the screen or swipe in from the

right edge.

2 When the Windows

charms appear, click or touch the

Settings ( ) charm.

NOTE

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 195 196

No comments

Toshiba P55-A5200 User's Guide Page 48