Toshiba IK-TU40A User Manual download pdf (Page 8)

5. CONNECTION

S.1

Coaxial

DC power

supply

When connecting the camera cables, be sure to turn off the camera control unit

and the other equipment connected.

For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA

approved ungrounding type AC adaptor with the specifications described below.

Power supply voltage: DC12V ± 10%

Current rating: More than 830mA, less than 2.5A

Ripple voltage: Less than 50mV(p-p)

Connector: HR10A-7P-4S by HIROSE electronics Co. Ltd.

Pins 1, 2: 12V

Pins 3, 4: GND

We suggest to use a C mount lens for 3CCD camera.

When using other lens, the best camera performance of this camera may not be

obtained.

(For example, low resolution may occur, focus may be lost through the range of

a zoom lens, and flare ghost shading may occur.)

Furthermore, in order to avoid damaging the mounting portion of the camera

head, use a lens which projection dimension from the mounting base is less than

0.157" (4 mm).

Less than 0.157"

(4mm)

If the screw on the camera connector portion of the camera cable looses, noise

may appear on the screen. So be sure to tighten the connector fully.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

No comments

Toshiba IK-TU40A User Manual Page 8