Toshiba IK-TU40A User Manual download pdf (Page 27)

(D Move the "o" to the zone to be appeared.

The display "o" moves up, down, left and right by pushing [MENU UP], [MENU DOWN],

[DATA UP], [DATA DOWN] buttons.

[MENU UP]

[DATA DOWN] O -^O [DATA UP]

[MENU DOWN]

@ Select ON/OFF for the zone.

Select ON (effective) or OFF (ineffective) by pushing [PAGE] button.

When ON is selected, the display "Q" appears on the screen and when OFF is se

lected, turns off.

® Push [DISP] button to return to the menu.

Note:

When OFF is selected for all 64 division areas, the automatic shutter func

tion and AWB function are not performed correctly. So do not select OFF for

all.

(8) Setting to factory setting status

The content set can be returned to the factory default status (preset status) for each file.

® Select a file to set to the factory default status by [FILE] switch.

® Disable the color bar display and the characters by pushing [DISP] button, if nec

essary.

® Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1

second.

® When the preset operation starts, the character PRESET blinks.

® When the preset operation finishes, the character PRESET disappears.

w j

When using the camera with an external sync signal, input VBS (composite video signal)

or BB (Black Burst) to "EXT. SYNC" terminal on the rear of the camera control unit, or

input HD and VD to DC IN/SYNC terminal. When the external sync signal is input, the

camera automatically switches its sync from the internal sync to the external sync. When

inputting HD and VD, set the HDA/D switch on the rear of the camera control unit to IN.

(1) External sync signal input conditions

VB, BB

(75Q unbalanced)

SYNC section 0.286 ± 0.1V

Burst section 0.286 ± 0.1V

2 ~ 5V(p-p) Negative

1 2 ... 22 23 24 25 26 27 28 29 30 31

No comments

Toshiba IK-TU40A User Manual Page 27