(a) Adjusting horizontal phase
© Set the to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
(D Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
---------
^ [DATA UP]
-99 <
--------
> 00 <---------> 99
---------
[DATA DOWN]
(b) Performing coarse adjustment of sub carrier phase
© Set the to SC 0/180 by pushing [MENU UP], [MENU DOWN] buttons.
® Select either 0 or 180 by pushing [DATA UP], [DATA DOWN] buttons.
(c) Adjusting sub carrier phase
© Set the to SC PHASE by pushing [MENU UP], [MENU DOWN] buttons.
@ Adjust the sub carrier phase by pushing [DATA UP], [DATA DOWN] buttons.
(6) OPTION
OUTPUT 1
OUTPUT 2
Nega/Posi inversion SW
DTL OUT ON/OFF
Automatic shading correction ON/OFF
G SYNC ON/OFF
(6.1) Changing OUTPUT 1 output
© Set the to OUTPUT 1 by pushing [MENU UP], [MENU DOWN] buttons.
® Select either RGB or Y/PR/PB by pushing [DATA UP], [DATA DOWN] buttons.
When Y/PR/PB is selected, the display G SYNC turns off automatically. So G SYNC
change cannot be performed.
OUTPUT 1
OUTPUT 2
Nega/Posi inversion SW
DTL OUT ON/OFF
Automatic shading correction ON/OFF
Menu when selecting Y/PR/PB
25
Comments to this Manuals