Toshiba Qosmio G10 User Manual download pdf (Page 179)

User’s Manual 9-20

Optional Devices

■ Do not transfer data in areas where static electricity is easily generated

or in areas subjected to electronic noise. Data can be destroyed.

■ If you are transferring data through an IEEE1394 hub, do not connect or

disconnect other devices from the hub during data transfer. There is a

likelihood that data will be damaged. Connect all devices to the hub

before you turn on the computer’s power.

■ You may not use any copyrighted video or music data copied from a

video camera except for your personal enjoyment.

■ If you connect/disconnect an i.LINK device to/from another i.LINK

device that is currently exchanging data with the computer, data frames

might be dropped.

■ Make sure data transfer has ended or turn off the computer, before you:

■ Connect/disconnect an i.LINK device to/from the computer.

■ Connect/disconnect an i.LINK device to/from another i.LINK device

that is connected to the computer.

Connecting

1. Make sure the connectors are properly aligned and plug the i.LINK

(IEEE1394) cable into the computer.

Connecting the i.Link (IEEE 1394) port

2. Plug the other end of the cable into the device.

Note the following when you use i.LINK:

■ You may need to install drivers for your i.LINK devices.

■ Not all i.LINK devices have been tested. Therefore, compatibility with all

i.LINK devices cannot be guaranteed.

■ Use S100, S200 or S400 cables no longer than three meters.

■ Some devices might not support standby or automatic off functions.

■ Do not connect or disconnect an i.LINK device while it is using an

application or when the computer is automatically shutting it down to

save power. Data might be destroyed.

i.LINK (IEEE1394) port

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 234 235

No comments

Toshiba Qosmio G10 User Manual Page 179