Toshiba TLP-B2U User Manual download pdf (Page 58)

CONTENTS

Maintenance

Notes

• The projector displays the total working time at

every 1,000 hours (only when plugged in and

turned on).

• The lamp should be replaced if the total

working time exceeds about 2,000 hours.

• Attach the lamp cover firmly after replacing the

lamp. If it is not set correctly, the power will not

turn on.

• Use a new lamp when replacing it.

• The lamp is made of glass and is very fragile.

Do not touch the lamp with your bare hands

and do not jolt or damage it. Do not use an

exhausted lamp.

Lamp replacement (Continued)

Load a new lamp.

Slide until it hits the bottom and tighten the

two fixed screws.

Attach the lamp cover.

Slide the cover in place and tighten two

screws.

Reset the lamp timer.

Refer to the lamp instructions for resetting.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 66 67

No comments

Toshiba TLP-B2U User Manual Page 58