Toshiba TDP-MT200 User Manual download pdf (Page 22)

Notes

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to

appear via the Display setting menu

p.30

• The first time you use the projector after purchase, after the start-up screen disappears,

the Language menu is displayed

p.23

■ Turning the power off

Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while.

Then, the projector goes into standby mode.

When cooling lamp During internal cooling After cooling complete

A B C

(Orange) (Orange)

(Green) (Green)

(Off)

(Orange)

Flashing

(Green)

(Off)

During cooling, the LAMP indicator flashes. In this state, the power cannot be

turned back on.

After the LAMP indicator goes off, the cooling fan continues to operate for a

short while, in order to expel excess internal heat. If you are in a hurry, there is

no problem with unplugging the power cord or turning off the main power switch

in this state.

In standby mode

Note

• The projector consumes about 12W of power in standby. We recommend that you unplug

the power cord or turn off the main power switch if you will not be using the projector for

an extended period.

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light, and

its lifetime will be shortened.

Turning the power on and off (Continued)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

No comments

Toshiba TDP-MT200 User Manual Page 22