Toshiba TDP-MT200 User Manual download pdf (Page 20)

p.43

Before connection

• Read the owner’s manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

Check for an RGB output terminal, supported signal

p.39

, etc.

•Turn off the power of both devices before connecting.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Notes

• If you want to feed the digital RGB signal, separately available DVI cable is needed.

• If you are using the digital RGB signal for input to this unit, some computer models or a

certain type of DVI cable may cause on rare occasions noise on the screen. If such is a

case, decrease your computer’s refresh rate or the resolution. It is also recommended to

use a DVI cable in 2 m or less in length.

Connection

Computer (for control)

VCR, etc

Video recorder,

DVD player, etc.

To RS-232C

terminal

Control cable

To video

output

Video cable (supplied)

To S-Video

output

S-Video cable

(supplied)

RGB component video cable

(not supplied)

To Y/CB/CR output

Green (Y)/Blue (CB)/Red (CR)

DVI cable

(not supplied)

To RGB output

Computer

DVD video recorder, etc.

Computer

RGB cable

(not supplied)

To DVI output

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comments to this Manuals

No comments

Toshiba TDP-MT200 User Manual Page 20

Comments to this Manuals

Related products and manuals for Projectors Toshiba TDP-MT200