Toshiba W4333 User Manual download pdf (Page 36)

English

CONTROLS AND FEATURES

Assisted Setup

a In the Network menu, press B / b to select

Network Setup and press OK.

b Press B / b to select Wireless Setup and press

OK.

c Press B / b to select Assisted Setup and press

OK.

d Press B / b to select the desired AP and press

OK.

NOTE: Check the MAC address on the label of the

AP or in the manual, and select your AP.

e Highlight Security Key and press OK. The

Software Keyboard window will appear.

f Input the Security Key by using the Software

Keyboard (see page 40). To save your setting,

press the GREEN button.

NOTE:

• The Security Key must adhere to these

conditions:

- TKIP/AES: 8-63 ASCII or 64 Hex characters

- WEP: 5 or 13 ASCII or 10 or 26 Hex characters

• There is only one key ID to set for WEP

encryption.

g Highlight Done and press OK.

NOTE: If Network Name is not displayed, see

step 3 and 4 in Manual Setup to set Network

Name before pressing Done.

NOTE: Settings are not saved if BACK is pressed before

Done is selected.

Manual Setup

a In the Network menu, press B / b to select

Network Setup and press OK.

b Press B / b to select Wireless Setup and press

OK.

c Press B / b to select Manual Setup and press

OK.

d Press B / b to select Network Name and press

OK. The Software Keyboard window will appear.

e Input the Network Name by using the Software

Keyboard (see page 40). To save your setting,

press the GREEN button.

f Press B / b to select Authentication and press c

and

B / b to select Open System, Shared Key,

WPA-PSK or WPA2-PSK.

g Press B / b to select Encryption and press c

and

B / b to select None, WEP, TKIP or AES.

NOTE:

• Certain encryption types are only compatible

with specific authentication types.

- When Authentication is Open System, only

WEP or None is compatible.

- When Authentication is Shared Key, only WEP

is compatible.

- When Authentication is WPA-PSK or WPA2-

PSK, only TKIP or AES is compatible.

• When incompatible Authentication/Encryption

pairings are detected, a warning message will be

displayed, and no connection attempt will be

made until the incompatibility is resolved.

• There is only one key ID to set for WEP

encryption.

h Press B / b to select Security Key and press OK.

i Input the Security Key by using the Software

Keyboard (see page 40). To save your setting,

press the GREEN button.

NOTE: This item is greyed out when Encryption is

None.

j Highlight Done and press OK.

NOTE: When Encryption is None, a message will

appear. Press

C / c to select Yes and press OK.

NOTE: Settings are not saved if BACK is pressed before

Done is selected.

Easy Setup

Assisted Setup

Manual Setup

< Wireless Setup

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

Comments to this Manuals

No comments

Toshiba W4333 User Manual Page 36

Comments to this Manuals

Related products and manuals for Monitors Toshiba W4333