Toshiba NB100 User Manual Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 127
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
User’s Manual 8-8
Optional Devices
Removing the SIM card
To remove the SIM card, follow the steps below.
1. Turn the computer off in boot mode. Refer to the Turning off the power
section in Chapter 3.
2. Remove all cables connected to the computer.
3. Directly pull out the sim card inside the socket to eject it.
4. Grasp the card and remove it.
Additional AC adaptor
If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load. PA3467U-1ACA/
PA3467E-1AC3.
USB FDD Kit
The 3 1/2" external FDD drive module can be connected to the USB port.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Connect the monitor to the external monitor port.
2. Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
You can use the BIOS Setup to select between
Auto-Selected and
LCD+Analog RGB displays. Refer to Chapter 7, BIOS Setup and
Passwords.
If you have selected
LCD+Analog RGB under the Display options of
the BIOS Setup, both the external monitor and the internal LCD will be
active when you turn on the computer. If Auto-Selected is selected,
only the external monitor will be active.
To change the display settings, press Fn + F3. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F3 to
switch to the internal display. Refer to Chapter 5, The Keyboard, for details
on using hot keys to change the display setting.
The hibernation and standby feature can be used with an external monitor.
Simply enable hibernation and standby and the computer will maintain the
data as it is displayed on the external monitor.
If you set
LCD+Analog RGB
for the computer’s display, you must set the
computer’s display resolution to the same as that of the external monitor
or other device, such as a projector.
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 126 127

Comments to this Manuals

No comments