Toshiba Tecra M3 User Manual download pdf (Page 183)

User’s Manual 9-19

Troubleshooting

i.LINK (IEEE1394)

Modem

Problem Procedure

i.LINK device does not

function

Make sure the cable is securely connected to the

computer and to the device.

Make sure the device’s power is turned on.

Reinstall the drivers. Open the Windows

Control Panel and double-click the Add

Hardware icon. Follow the on-screen

directions.

Restart Windows.

If problems persist, contact your dealer.

Problem Procedure

Communication

software can’t initialize

modem

Make sure the computer’s internal modem

settings are correct. Refer to Phone and Modem

Properties in the Control Panel.

You can hear a dial

tone but can’t make a

call

If the call is going through a PBX machine, make

sure the communication application’s tone dial

detection feature is disabled.

You can also use the ATX command.

You place a call, but a

connection can’t be

made

Make sure the settings are correct in your

communications application.

After making a call you

can’t hear a ring

Make sure the tone or pulse selection in your

communications application is set correctly.

You can also use the ATD command.

Communication is cut

off unexpectedly

The computer will automatically cut off

communication when connection with the carrier

is not successful for a set time interval. Try

lengthening this time interval.

A CONNECT display is

quickly replaced by NO

CARRIER

Check the error control setting in your

communications application.

You can also use the AT\N command.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 235 236

Comments to this Manuals

No comments