Toshiba Portege R400 User Manual Page 131

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 130
User’s Manual 7-7
HW Setup & BIOS Setup
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Power will be automatically turned on when a signal is received from an
administrator’s computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6, Retaining
data with power off.
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option allows you to set how the computer’s hardware devices will be
configured.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN (Default).
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled Enables Built-in LAN functions (Default).
Disabled Disables Built-in LAN functions.
All Devices The computer’s BIOS will setup and configure all
devices.
Setup by OS The operating system will setup and configure all
of the devices that it can control (default).
Page view 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 197 198

Comments to this Manuals

No comments