Toshiba IK-TF5U User Manual

For Customer UseEnter below the Serial #which is located on thebottom of the cabinet. Retainthis information for futurereference.Model #: IK-TF5USeria

105. 3 GainWhen the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level.For the gain adjustment of

11ProcessElectronic shutter6. ITEMS CONTROLLED BY THE SCREEN DISPLAYMODEE. TRGMANU speedSyncro.scan.Partial readTr igger (1P SNR/SR)Tr igger(PW SNR/SR

12E. TRGRRE. TRGE. TRG1P SR1P SNRE. TRGPW SRE. TRGPW SNRSS MANUAWBWHT BALOFFMANUOFFSHAD.SHAD.MANUMANUPAGEPAGEPAGEPAGEEXT INTBAUD RATESHUTTER GAIN PROC

13MANUAL : It is possible to select the exposure time from eleven speed setting; OFF, 1/100s, 1/250s,1/500s, 1/1000s, 1/2000s, 1/4000s, 1/10000s, 1/25

14• Sutter mode MANU, SS, E.TRG• Sutter speed settingOFF, 100 (1/100s), 250 (1/250s), 500 (1/500s)1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s)1000

15• Sutter mode MANU, SS, E.TRG• Synchro. scanning setting• Partial scanning switch OFF/90fps/115fps/120fps/160fps/180fps/240fps/ E90fps/E115f

16-- SHUTTER --MODE E.TRGE.TRG 1P SNRTRG.PEXP. 16msPART OFF<MODE = E.TRG E.TRG = 1P SNR>• E.TRG mode• Partial scanning switch OFF/90fps/11

17-- SHUTTER --MODE E.TRGE.TRG 1P SRTRG.PEXP. 16msPART OFF0.01 ms 0.02 ms 0.4 ms 1 ms 16 ms<MODE = E.TRG E.TRG = 1P SR>

18-- SHUTTER --MODE E.TRGE.TRG PW SNRTRG.PPART OFF<MODE = E.TRG E.TRG = PW SNR>• Partial scanning switch OFF/90fps/115fps/120fps/160fps/180

19-- SHUTTER --MODE E.TRGE.TRG PW SRTRG.PPART OFF<MODE = E.TRG E.TRG = PW SR>• Partial scanning switch OFF/90fps/115fps/120fps/160fps/180fp

2SAFETY PRECAUTIONSSafety iconsThis manual contains safety instructions that must be observed in order to avoid potentialhazards that could result in

20-- GAIN --MODE MANUMANU 0dB• Gain mode MANU, OFF• Manual gain adjustment 0 dB to 18 dB (1 dB step)Move up down by pushing MENU UP, DOWNSelect th

21( 3 ) WHT BAL (White balance)WHT BAL has two modes; AWB, MANU.Move the "→" to MODE, push the [DATA UP], [DATA DOWN], and select one of t

22( 4 ) PROCESS• Gamma Correction (GAMMA)Select either OFF or ON of Gamma Correction.• Master Pedestal (M. PED)Adjust the Pedestal level of each RGB

23• Serial baud rate setting 9600, 19200-- OPTION --BAUD RATE9600Move up down by pushing MENU UP, DOWNSelect the desiredvalue by pushingDATA UP, DOW

247. 3 Synchro. Scan OperationThe shutter speed can be set by the horizontal scanning period (1H) or by the frame.( 1 ) Setting by 1H1H/525H ~ 524H/

25About 1 µsExternal VD IN*1External HD IN*1(Internal VD)Tr igger*1About 1HNegative polarity modePositive polarity modeExposure period*2Exposure perio

26About 1 µsExposure completion0 to 1H*3Exposure period*2Tr igger*1Negative polarity modePositive polarity mode(Internal VD)RGB data (video interval i

27( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET)The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.(3. 1) Pulse Width Trigg

28( 4 ) PW SR (Pulse width trigger SYNC-RESET)The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images.(4. 1) 1 Pulse Width Trig

29( 5 ) RR (Reset restart)Input of an external reset-restart signal (CC4 of the DIGITAL terminal: External VD input) permits one screenof informatio

3Note the following instructions when installing.• Do not cover the product with any material.• Do not place the product on any confined Inflammable m

307. 5Partial Read1/60s (525H)Video interval image1/90s (348H): When 90fps is selected1/115s (272H): When 115fps is selected1/120s (262H): When 120fps

31ExternalSync. signalMatchthe phase.LVAL signal output7. 6 External SyncWhen using the unit with an external sync signal, input HD and VD to CC3 and

328. INPUT OUTPUT SIGNAL SPECIFICATOINS5H 21H (Positive polarity mode) (Negative polarity mode)More than 2 µsMore than 2 µs2.0µs 5.0µs( 4 ) E

339. CCD OUTPUT WAVEFORM TIMING CHART( 1 ) Horizontal Output Waveform Timing Chart( 2 ) Vertical Output Waveform Timing Chart132 clk31 clk72 clk16 clk

3410. SPECIFICATIONSPower supplyPower consumptionPick-up systemImage sensorScanning SystemVideo output pixelsPixel clock frequencySync signal frequenc

3511. EXTERNAL APPEARANCE DIAGRAMUnit : mm [inch]* inch = mm/25.444 [1.73]44 [1.73]22 [0.87]6.3[0.25]5.3[0.21]78 [3.07]4.8 [0.19]4.8 [0.19] 56 [2.20]4

Limited Warranty – TOSHIBA CCD CameraThe Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following l

41. CAUTIONS ON USE AND INSTALLATION ... 52. COMPONENTS ... 53. NAMES AND FUNCTIONS ...

51. CAUTIONS ON USE AND INSTALLATION•Handling the unit.Do not drop, jolt, or vibrate, as this may result indamage to the unit. This may cause problems

63. NAMES AND FUNCTIONS1Camera cable for ‘IK-TF5H’ terminal Where the camera cable for ‘IK-TF5H’ is connected.2DISP button To change the display mode.

74. CONNECTION4. 1 Standard ConnectionDC IN 12V Connector used:HR10A-7R-4PB (HIROSE electronics Co. Ltd) or equivalent.DIGITAL Function I/O1 +12V 132

85. OPERATIONA camera head “IK-TF5H” is supposed to be connected to this camera control unit from this section.1Refer to the item " 4. CONNECTION

9MeaningAutomatic white balance adjustment finished correctly.Automatic white balance adjustment cannot be performed because thevideo level is too low