Toshiba IK-WB15A User Manual download pdf (Page 13)

0°o

Connecting the Camera and Personal Computer by Network

IP Address

To connect to the network, the administrator needs to set the IP address

of the network camera.

There are two options to set the IP address.

■ Obtaining an IP address automatically from the DHCP server

■ Entering an IP address manually

Obtaining an IP address automatically from the DHCP server

Your camera is set to get data automatically from the DHCP server

(DHCP ON/OFF is set to ON in "Network-Basic Settings") by default. If

your network is using a DHCP server, you do not need to change the IP

address of the camera.

• Entering the IP address manually.

• Manually enter the IP address when the DHCP server is not used or

when the DHCP server is not utilized even when connected.

• The IP address of the network camera is sometimes updated or

changed from time to time when the DHCP server is used. For this

reason, the network camera sometimes cannot be connected due to

an IP address change. (if the network camera is accessed using the

previously set IP address.)

To enable accessing the network camera in this case, a fixed IP ad

dress needs to be set to the network camera. (Set an IP address

through manual input) Please also read the instruction manauls for

the network system equipment(router,hub and modem) carefully.

• When entering the IP address manually, set DHCP ON/OFF to OFF in

"Network-Basic Settings" on page 84 in User's Manual in CD-ROM

and enter the IP address, subnet mask, default gateway, primary DNS

and secondary DNS.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Toshiba IK-WB15A User Manual Page 13