Toshiba TDP-PX10 User Manual download pdf (Page 43)

Maintenance

Lamp replacement (Continued)

Unplug power cord.

Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the screw, raise the lamp! cover with your

fingers as shown to remove the lamp cover. Use

care to avoid any!damage to nails and/or tip of your

finger(s). If! you have any difficulty in removal, you

can use!a screwdriver or any other smaller tool for

your!convenience.

Pull out the lamp.

Remove the two locking screws and carefully set

them aside. Then pull up the handle and remove

the lamp.

Mount the new lamp.

Align the orientation, press down the new lamp

until the bottom is reached, and lock in place using

the two lamp locking screws.

Replace the lamp cover.

Align the cover and press it in. Then replace the screws you removed in step , and

tighten them until the lamp cover is no longer loose. (Be sure to replace the lamp cover.)

Reset the lamp timer.

See the lamp's manual for instructions on resetting

the lamp timer.

Lamp cover

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

No comments

Toshiba TDP-PX10 User Manual Page 43