Toshiba TDP-MT700 User Manual download pdf (Page 6)

POWER SUPPLY CORD SELECTION 6

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your

projector. For maximum protection, repack the set as it was originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the

unit is exposed to such a change in temperature, moisture may condense on the crucial internal

parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is

an extreme or sudden change in temperature.

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction,

and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their

lives, and darkening the screen.

• Do not use the product vertically in any upright position or slantwise in an angle of 20 degrees or

more.

• Using this instrument near a TV or radio may cause interference to the images or audio sound. If

this happens, move it away from the TV or radio.

• Moving the projector from a low-temperature room to a high-temperature room may cause conden-

sation on the lens or internal parts in the instrument. If you continue to use it in that situation, the

malfunction may result. Ensure to wait until the condensation naturally disappears.

• In a high altitude location where air is thin, cooling efficiency is reduced so use it with the ambient

temperature being lowered.

Plug

configuration

Plug type Line

voltage

Plug

configuration

Plug type Line

voltage

EURO 220 - 240V Australian

240V

10A

200 - 240V

UK 220 - 240V Switzerland

240V

200 - 240V

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

North

American

240V

15A

200 - 240V

1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Comments to this Manuals

No comments

Toshiba TDP-MT700 User Manual Page 6

Comments to this Manuals

Related products and manuals for Projectors Toshiba TDP-MT700