Toshiba TDP-MT700 User Manual download pdf (Page 33)

Additional information

33

English

Troubleshooting

Problem Cause Remedy

The

projector

does not

turn on.

There is no power from the

power cord.

Plug the power cord into the AC inlet

on the rear of the projector, and plug

the power cord into to the power outlet.

If the power outlet has a switch, make

sure that it is switched on.

The power switch is not in the

on position.

Put the power switch in the on position.

Attempting to turn the projector

on again during the cooling pro-

cess.

Wait until the cooling down process has

completed.

The lamp cover is not securely

attached.

Correctly attach the lamp cover.

No picture.

The video source is not turned

on or connected correctly.

Turn the video source on and check

that the signal cable is connected cor-

rectly.

The projector is not correctly

connected to the input source

device.

Check the connection.

The input signal has not been

correctly selected.

Select the correct input signal with the

INPUT buttons on the remote control or

INPUT on the projector.

Image is

unstable.

The connection cables are not

securely connected to the pro-

jector or the signal source.

Correctly connect the cables to the

appropriate terminals.

Picture is

blurred.

The projection lens is not cor-

rectly focused.

Adjust the focus of the lens using the

focus ring.

The projector and the screen

are not aligned properly.

Adjust the projection angle and direc-

tion as well as the height of this unit if

necessary.

The lens cap is still attached to

the lens

Remove the lens cap.

Remote

control does

not work

correctly

The batteries are out of power. Replace both of the batteries with new

ones.

There is an obstacle between

the remote control and the pro-

jector.

Remove the obstacle.

You are too far away from the

projector.

Stand within 8 meters (26.2 feet) of the

projector.

p. 20

p. 20

p. 30

p. 18

p. 18

p. 20

p. 18

p. 21

p. 21

p. 20

p. 11

p. 13

p. 13

1 2 ... 28 29 30 31 32 33 34

Comments to this Manuals

No comments