Toshiba TDP-MT500 User Manual download pdf (Page 8)

SELECTING THE POWER CORD

If your line voltage is 220 to 240 V, use one of the following types of cord.

Plug

configuration Plug type Line voltage

EURO 220 – 240 V

UK 220 – 240 V

Use a 5 A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after changing

the fuse.

Plug

configuration Plug type Line voltage

Australian

240 V

10 A

Switzerland 200 – 240 V

240 V

6 A

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship

your projector. For maximum protection, repack the projector as it was originally packed at

the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insecticide, near the projector. Do not leave rubber or

plastic products touching the projector for a long time. They will leave marks on the finish. If

cleaning with a chemically saturated cloth, be sure to follow the product’s precautions.

Moisture Condensation

Never operate this projector immediately after moving it from a cold location to a warm loca-

tion. When the projector is exposed to such a change in temperature, moisture may con-

dense on the crucial internal parts. To prevent the projector from possible damage, do not use

the projector for at least 2 hours when there is an extreme or sudden change in temperature.

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke. If exposed to these conditions, you could dirty

the projector’s optical parts, shortening its life, and darkening the screen.

• Do not use at an angle of 15 degrees or more. Doing so could shorten the life of the lamp.

• If used at high altitudes, the projector may cease the operation even if used within the

rated temperature range. This is because the thinner air at high altitudes decreases the

internal cooling efficiency. Therefore, please lower the ambient temperature if using at high

altitudes.

• Contact your dealer for the ceiling mount bracket. As installation requires technical knowl-

edge and skill, be sure to ask your dealer for installation.

• When mounted on the ceiling, the product shall be installed by the dealer with the bracket

designed for this product. If you attempt to install the product by yourself, you may fall and

be injured or the product may fall causing injury.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments

Toshiba TDP-MT500 User Manual Page 8

Comments to this Manuals

Related products and manuals for Projectors Toshiba TDP-MT500