Toshiba 50HM66 User Manual download pdf (Page 6)

HM66 (E/F) Web 213:276

Chapter 1: Introduction

TV back panel connections

For an explanation of cable types and connections, see the Installation Guide.

1234 5

1 VIDEO 1 IN — Standard (composite) video and standard

audio inputs plus optional S-video inputs for connecting

devices with composite video or S-video output.

Note: Standard (composite) video and S-video cables

carry only video information; separate audio cables are

required for a complete connection.

2 ColorStream

HD-1 and ColorStream

HD-2 —

Two sets of ColorStream

high-definition component

video inputs (with standard stereo audio inputs) for

connecting devices with component video output, such as

a Toshiba DVD player with ColorStream

Note: Component video cables carry only video

information; separate audio cables are required for a

complete connection.

ColorStream

HD-1 and ColorStream

HD-2

Audio IN — ColorStream HD-1/2 audio input terminals

are shared with HDMI 1/2 analog audio input terminals,

and their use can be configured in the Setup menu

(- “Setting the ColorStream HD audio mode” page 20).

3 Variable Audio OUT — Standard analog audio outputs

for connecting an analog amplifier with external speakers.

4 A/V OUT — Standard composite video and analog audio

outputs for connecting a VCR for editing and dubbing.

5 IR OUT — For controlling infrared remote-controlled

devices through the TV. You can connect up to two

devices with an IR blaster cable, and then control the

devices using the TV’s IR pass-through features.

6 ANT 1 and ANT 2 — Two inputs that support analog

(NTSC) and digital (ATSC) off-air antenna signals and

analog and digital (QAM) Cable TV signals.

Note: If you have an antenna only, connect it to ANT 1. If

you have both cable TV and an antenna, connect the

cable TV to ANT 1 and the antenna to ANT 2.

7 HDMI™ 1 and 2 IN — Two High-Definition Multimedia

Interface inputs receive digital audio and uncompressed

digital video from an HDMI device or uncompressed

digital video from a DVI device. Also see item 2.

8 Digital Audio OUT — Optical audio output in Dolby

Digital or PCM (pulse-code modulation) format for

connecting an external Dolby Digital decoder, amplifier,

A/V receiver, or home theater system with optical audio

input.

9 CableCARD™ slot — For use with a digital security

card and digital cable TV service (provided by your local

cable operator) to view encrypted digital programming

(- page 20).

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

CableCARD is a trademark of Cable Television Laboratories, Inc.

HM66_EN.book Page 6 Thursday, February 23, 2006 2:49 PM

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comments to this Manuals

No comments

Toshiba 50HM66 User Manual Page 6

Comments to this Manuals

Related products and manuals for Projectors Toshiba 50HM66