Toshiba Satellite R830 User Manual download pdf (Page 161)

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:

1. Save your work.

2. Turn the computer's power off - ensure that the Power indicator is off.

3. Remove all cables and peripherals that are connected to the

computer.

4. Close the display panel and turn the computer upside down.

5. Slide the battery lock into its unlocked (

) position.

6. Slide and hold the battery release latch to disengage the battery pack

and then remove it from the computer.

Figure 5-1 Releasing the battery pack (R830)

1 2

1. Battery lock 3. Battery pack

2. Battery release latch

Installing the battery pack

To install a battery pack, follow the steps as detailed below:

Do not touch the battery release latch while holding the computer or the

battery pack might fall out due to the unintentional release of the battery

release latch and cause injuries.

1. Insert the battery pack as far as it will go into the computer.

2. Ensure that the battery pack is securely in place and the battery lock is

in its locked position.

3. Turn your computer over.

Power-up modes

The computer has three different power-up modes as follows:

Shut Down Mode: The computer will shut down without saving data -

in view of this you must always save your work before you turn the

computer off.

Hibernation Mode: Data in memory will be saved to the hard disk

drive.

Sleep Mode: Data will be maintained in the computer's memory.

R850/R840/R830

User's Manual 5-10

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 211 212

No comments

Toshiba Satellite R830 User Manual Page 161