Toshiba LX830 User Manual download pdf (Page 94)

System LCD Only Selects the internal LCD, even if an external

monitor is connected.

Boot Setting

This function allows you to modify the boot settings.

Boot Priority Options

This tab allows you to set the priority for booting the computer. The Boot

Priority Options setting window will be displayed. Click the up and down

arrow buttons to adjust the priority.

To change the boot drive, follow the steps below.

1. Hold down F12 and boot the computer. when the TOSHIBA Leading

Innovation >>> logo screen appears, release the F12 key.

2. Use the up and down cursor keys to select the boot device you want

and press ENTER.

If a Supervisor Password has been set, manual boot device selection

functions may be restricted.

The boot device selection methods described above will not change the

boot priority settings that have been configured in HW Setup. In addition, if

you press a key other than one of those listed, or if the selected device is

not installed, the system will continue to boot according to the current and

available settings in HW Setup.

Boot Speed

This feature allows you to select system boot-up speed.

Fast Reduces system boot-up time. System can boot

only from the built-in HDD and only internal LCD

and keyboard are supported during the boot

process.

Normal System boots up at normal speed. (Default)

Keyboard

This tab allows you to set conditions for the Keyboard.

Function Keys mode (without pressing FN first)

This feature allows you to configure the Function Keys Mode. For the Hot

key functions can be performed, please refer to the Hot keys section in

Chapter 3, Operating Basics.

Special function

mode

Press the function key by itself to use special

functions. Hold FN first to use standard F1-F12

functions.

User's Manual 4-12

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 130 131

No comments

Toshiba LX830 User Manual Page 94