Toshiba M40 User Manual Page 135

  • Download
  • Add to my manuals
  • Print
  • Page
    / 262
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 134
4.1 General 4 Replacement Procedures
4 1
4.1 General
This chapter explains how to disassemble the computer and replace Field Replaceable Units
(FRUs). Some replacement procedures may not require you to remove all the surrounding
FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they
should be removed in a top-down manner, irrespective of their physical locations. The FRUs
shown in the top area of the chart should normally be removed before removing the FRUs
shown in the bottom area. To replace the FRUs, first identify the suspect FRU for the system
failure. Next, according to this chart, determine the FRUs that need to be removed before
removing the suspect FRU. After you determined those FRUs, go to the appropriate sections
according to the section numbers shown in the boxes. Then start removal and replacement
4.9
Top Cover
4. 3
HDD
4. 7
ODD Bay Module
4. 17
Touch Pad and
Button Board
4. 2
Wireless LAN Card
4. 6
Speaker cover
4. 16
4. 8
Display Assembly
4. 10
System Board, Speaker and
AC-IN, RJ11/45, MDC cable
4. 12
Display Mask
4. 13
FL Inverter Board
4. 14
LCD Modules
4. 4
Cooling Module
4. 5
CPU
Switch cover and
Hotkey Board
4.11
North Bridge Thermal Module
4. 15
I/O Board
System Board
LCD Module
4.9
Top Cover
4. 3
HDD
4. 7
ODD Bay Module
4. 17
Touch Pad and
Button Board
4. 2
Wireless LAN Card
4. 6
Speaker cover
4. 16
4. 8
Display Assembly
4. 10
System Board, Speaker and
AC-IN, RJ11/45, MDC cable
4. 12
Display Mask
4. 13
FL Inverter Board
4. 14
LCD Modules
4. 4
Cooling Module
4. 5
CPU
Switch cover and
Hotkey Board
4.11
North Bridge Thermal Module
4. 15
I/O Board
How to use the chart (two examples):
For removing the System Board
First, remove the top cover with the
display assembly. Then, remove the
HDD, selectable bay module,
Bluetooth card, keyboard, and
wireless LAN card, all of which are
shown above the top cover with the
display assembly.
For removing the LCD Module
First, remove the display mask and
FL inverter board, both of which are
shown above the LCD module.
EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual 4-1
Page view 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 261 262

Comments to this Manuals

No comments