Toshiba A10 Series User Manual download pdf (Page 220)

User's Manual

D-2

APPENDIX D

S0 Auto answer ring number

This register determines the number of rings the modem will count

before automatically answering a call. Enter 0 (zero) if you do not want

the modem to automatically answer at all. When disabled, the modem

can only answer with an ATA command.

Range: 0-255

Default: 0

Units: rings

S1 Ring counter

This register is read only. The value of S1 is incremented with each

ring. If no ring occurs over a six-second interval, this register is

cleared.

Range: 0-225

Default: 0

Units: rings

S2 AT escape character (user defined)

This register determines the ASCII values used for an escape se-

quence. The default is the + character. The escape sequence allows the

modem to exit data mode and enter command mode when on-line.

Values greater than 127 disable the escape sequence.

Range: 0-255, ASCII decimal

Default: 43

Units: ASCII

S3 Command line termination character

(user defined)

This register determines the ASCII values as the carriage return

character. This character is used to end command lines and result

codes.

Range: 0-127, ASCII decimal

Default: 13 (carriage return)

Units: ASCII

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 258 259

No comments

Toshiba A10 Series User Manual Page 220