Toshiba BDX1250 Owner's Manual download pdf (Page 19)

19

English

manual for details.

• [Color Space]

Select a predened Color space of

picture.

{RGB} – Select RGB Color space.

{YCbCr} – Select YCbCr Color space.

{YCbCr422} – Select YCbCr422 Color

space.

{Full RGB} – Select Full RGB Color

space.

• [HDMI Deep Color]

This feature is available only when the

display device is connected by a HDMI

cable, and when it supports Deep Color

feature.

{30 bits} – Output 30 bits Color.

{36 bits} – Output 36 bits Color.

{Off} – Output standard 24 bits Color.

Note:

-When the color space is "YCbCr422", even if HDMI

Deep Color is set to 30bits/36bits, it is not output

with Deep Color.

• [HDMI 1080/24p]

{On} – Enable 1080/24p video

resolution setting.

{Off} – Disable 1080/24p video

resolution setting.

Notes about HDMI 1080/24p:

If you want the 24Hz output, it should fulll below

3 conditions:

1.TV supports the 24Hz display;

2.Player choose the 24Hz option in the setup

menu;

3.Media must be the 24Hz video.

Notes:

- This resoluon becomes eecve only when

the playing Blu-ray Disc™ contents are Film

source.

- During HDMI 1080/24p playback, there will

be no composite output.

[Video Process]

TV

Video Adjust More...

Low

Video Process

Sharpness

Display Setting

SETUP

Exit

Move cursor key to select menu option

then use “OK ” key to select

• [Video Adjust]

Select a predened setting of the video.

1. Press OK .

2. Press/ to adjust the video

Brightness, Contrast, Hue and

Saturation.

{Brightness} - Press / to adjust

the brightness of display, goes left

means dark and right means bright.

{Contrast} - Press / to adjust

the contrast of display, goes left

means low contrast and right means

high contrast.

{Hue} - Press / to adjust the Hue

of display, goes left means low hue

and right means high hue.

{Saturation} - Press / to adjust

the saturation of display, goes left

means low Saturation and right means

high saturation.

3. Press RETURN to exit.

Brightness

Contrast

Hue

Saturation

RETURN

ExitChange









• [Sharpness]

Select the level of sharpness: High,

Middle, Low.

{High} - Select High sharpness level.

{Middle} - Select Middle sharpness

level.

{Low} - Select Low sharpness level.

Audio Setting

1. Press SETUP, [General Setting] menu

is displayed.

2. Press  to select [Audio Setting],

then press  .

3. Select an option, press  to access.

SETUP

Exit

Audio Output

Spdif

PCM

PCM

48K

HDMI

Down_samp

AutoDolby DRC

Audio Setting

Move cursor key to select menu option

then use “OK ” key to select

4. Press / to select a setup option and

press .

5. Select the setting you wish to change

and press OK to conrm.

- Press  to return to the previous

menu.

- Press SETUP to exit the menu.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Comments to this Manuals

No comments