Toshiba BDX1250 Owner's Manual download pdf (Page 10)

10

English

4 Preparation

Always follow the instructions in this chapter

in sequence.

Note:

- Use of controls or adjustments or

performance of procedures other than herein

may result in hazardous radiaon exposure or

other unsafe operaon.

Prepare the remote control

1. Open the battery compartment.

2. Insert one R03 battery with correct

polarity (+/-) as indicated.

3. Close the battery compartment.

Notes:

- If you are not going to use the remote control

for a long me, remove the baery.

- Risk of explosion! Keep baery away from

heat, sunshine or re. Never discard baery in

re.

• The maximum operable ranges from

the unit are as follows.

- Line of sight: approx. 10 m

- Either side of the centre: approx. 7 m

within 30°

- Above: approx. 7 m within 30°

- Below: approx. 7 m within 30°

7 m 10 m7 m

Setting up the player

Find the correct viewing input

1. Press 1 to turn on this product.

2. Turn on the TV and switch to the correct

video-in input (refer to the TV user manual

on how to select the correct input).

Initial Setting

When you turn on this unit for the rst time,

you need to follow these steps.

1. A welcome page will be displayed when

this product is powered on.

2. Press OK to enter language setting.

3. Select your desired language,

resolution and aspect ratio using /, then

press OK.

4. Press SETUP to exit the Setup menu.

Use the SETUP menu

1. Press SETUP to display the Setup menu

when the Blu-ray Disc

TM

Player is playing or

no disc. And press SETUP to exit the Setup

menu.

Tip:

- When playing high-denion sources, you must press

STOP 

buon to enter

SETUP

interface.

Select menu display language

1. Press SETUP, [General Setting] menu

is displayed.

2. Select [Language], then press .

3. Select [OSD], then press .

- The language options may vary for

different regions.

4. Press / to select a language, then

press OK.

Note:

- If this disc player is connected to a HDMI CEC

compliant TV, skip this setting. It switches

automatically to the same OSD menu language

as per your TV setting.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments