Toshiba Camileo P100 User Manual download pdf (Page 10)

Section 2

Getting Started

Loading the Battery

Before using the camcorder, users must load the Lithium-ion

rechargeable battery come within the package.

1. Insert the battery according to the correct polarity marks (+ or -).

2. Close the battery cover rmly.

Note

Pleasetakeoutthebatteryfromthecamcorderandremovetheinsulatoronthebattery

connectionbeforeuse.

Charge your battery

You must use the supplied AC charger or the USB

cable. The camcorder must be turned OFF. The

blinking light conrms the camcorder is currently

charging, and the light becomes constant after

the charging is completed. In AC charging Mode,

the light will turn itself off automatically after 3~5

minutes. The full charge time is about 3 to 4 hours.

(Actual charging time may vary. It depends on the

battery conditions.)

Inserting and Removing an SD Card (Optional)

The camcorder comes with an internal memory which allows you to

store photos and videos. You can expand the memory capacity by

using an optional SD memory card.

1. Insert the memory card into the slot. Please refer to the gure

on the right side.

2. To remove an installed SD card, press the card inwards to

release it.

3. When the card pops out, gently remove it from its slot.

4. Recommended memory capacity: 1GB or above.

Note

• When a memory card is tted, videos/photos are saved

on the card rather than on the built-in memory.

• ProtectingDataonanSDCard:SDCardisread-only

whenitislocked.Nophotosorvideoscanberecorded

whentheSDcardislocked.Makesurethelockison

thewriteablepositionbeforerecordinganymedia.

Writeable

position

Write-Protected

Position

REMOVE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

No comments

Toshiba Camileo P100 User Manual Page 10