Toshiba Qosmio X300 User Manual download pdf (Page 176)

User’s Manual 9-18

Troubleshooting

eSATA device

In addition to the information in this section, please also refer to the

documentation supplied with your eSATA device.

External devices

connected to the

compatible ports do not

work when connected

to a compatible port.

Some external devices may not work when

connected to a compatible port when the "USB

Sleep and Charge function" is [Enabled].

Reconnect the external device after turning ON

the computer.

If the external device still does not work,

connect device to an USB port that does not

have the USB Sleep and Charge function-

compatible icon ( ) or change the "USB Sleep

and Charge function" setting to [Disabled].

The "USB WakeUp

function" does not work.

When "USB Sleep and Charge function" is set

to [Enabled], the "USB WakeUp function" does

not work for ports that support the USB Sleep

and Charge function.

In that case, use an USB port that does not

have the USB Sleep and Charge function-

compatible icon ( ) or change the "USB Sleep

and Charge function" setting to [Disabled].

Problem Procedure

eSATA device does not

work

Remove the eSATA device from the computer

and then reconnect it to a free port it in order to

ensure it is firmly attached.

Ensure that any required eSATA device drivers

are properly installed - to achieve this you should

refer to both the device documentation and the

operating system documentation.

If you are still unable to resolve the problem,

contact your reseller, dealer or service provider.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 218 219

No comments

Toshiba Qosmio X300 User Manual Page 176