Toshiba TOSLINE S20 User Manual download pdf (Page 26)

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual 6F3B0360

TOSLINE S20 25

9. Installation and Wiring

9.1 Method for mounting the main unit

The Active Star Coupler may be installed within a cubicle, on a table, or onto a panel.

(1) Installation in a cubicle

Unit: mm

Cubicle

Active Star Coupler

L-shape

bracket

Base for the unit

Support for the unit

Figure 9.1 Installation of Active Star Coupler in a cubicle

Using L-shape brackets and M5 screws (12 to 20 mm in length), mount the Active Star

Coupler main unit to the base for the unit.

In that case, remove the rubber feet at the bottom of the Active Star Coupler. The L-

shape brackets have already been attached to the main unit of Active Star Coupler.

(2) Installation on a table

For the case of installation of Active Star Coupler on a table, place the Active Star Coupler

on the table. The Active Star Coupler is equipped with rubber feet at the bottom. If the attached

L-shape bracket is unwanted, remove them by detaching the screws at the sides of the main unit.

After removing the L-shape brackets, retighten the once detached screws.

(Note) Do not stack the Active Star Couplers because the Coupler is not designed to have

strength bearing that weight.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

No comments

Toshiba TOSLINE S20 User Manual Page 26