Toshiba KV-7168A User Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
RPFrilíP t'ALLINfî
Cu.: C..CÎ ^ íij^j
■WMáMMMniáÉáaMMáÉáiiiM^
PERSONNEL
iiiiiiiiiiiliiiiii^^
If you suspect a breakdown, check the following points before calling your serviceman for follow-up service.
Installation
Power does not go ON.
■ Is the power plug securely inserted to an AC outlet?
There is no camera picture.
Is the VCR properly connected to the TV, video camera and other
devices?
Is there any problem with the connection of the connecting cords?
The camera picture is indistinct.
■ Is the cannera properly focused?
Function/O pe ratio n
The VCR does not operate even when the control
buttons are pressed.
Has a video tape been inserted?
Is the REMOTE switch OFF?
Is the Dew lamp blinking?
The VCR is not operating because the safety functions are operat
ing. Wait until the blinking stops with the Power switch ON.
The clock does not run after restoration of power
following a power failure.
. ...
■ Has the VCR's power plug been removed from the AC outlet for a
long period? Insert the power plug in the AC outlet and carry out
continuous charging for 48 hours or longer.
The buzzer does not sound.
■ Is the BUZZER switch set to OFF? if off, the buzzer does not work.
Recording
Playback, fast forward and rewind are possible but
recording is not possible.
Is the tab on the video cassette broken off?
Is the video tape at tape end?
Recording has slopped. ■ Have more than 10 minutes passed since pressing the PAUSE
button during recording?
Nothing is being recorded.
■ Have you been carrying out regular daily checks?
If this phenomenon occurs often, something may be broken.
Consult with your dealer.
Not possible to record after restoring power following
a power failure.
Is restart recording OFF?
Has the power failure lasted for longer than 10 days?
Repeat recording is not possible. Is TAPE END MODE on REW^REC?
Has one of the operations buttons been pressed during automatic
rewind?
Is TAPE END ALARM on CONI'?
Tinner recording is not possible. m Is the present time setting correct?
Is the timer setting correct?
Has the TIMER button been pressed?
Did a power failure continue for a long period after the timer was
set?
Has the POWER switch been turned ON?
Has the power plug been removed from the AC outlet?
Alarm recording is not possible.
■ Are the alarm sensor and the alarm input properly connected?
48
Page view 47
1 2 ... 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments