Toshiba TDP-TW100 User Manual download pdf (Page 11)

2120

Preparations

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles.

The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the

Default setting menu

p.41

, in accordance with your needs.

Placement

WARNING

• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus

resulting in injury.

• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the

projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.

Improper mounting could cause the projector to fall, resulting in an accident.

• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let

everyone involved with the use of the projector know that fact.

Floor-mounted front projection Floor-mounted rear projection

Ceiling-mounted front projection Ceiling-mounted rear projection

Operating a computer using the remote control

A computer can be operated using the projector’s remote control. This function is available

on any computer with the Windows

98/98SE, Windows

Me, Windows

2000, or Win-

dows

XP OS, that is equipped with a USB port which can support USB1.1 (The mouse

remote control receiver is also supported on OS 9 or OS X for the Macintosh). However,

please note that Toshiba does not guarantee the operation of all computers.

Connecting a computer

Connect the mouse remote control receiver (supplied) to a computer.

Mouse remote control receiver

To USB port

Operating a computer

Operate remote control’s buttons towards the mouse remote control receiver.

● Moving the mouse pointer

Press the mouse control button in the direction you wish the mouse pointer to move,

then press.

● To left click

Press the L-CLICK button.

● To right click

Press the R-CLICK button.

● To drag and drop

Holding down the L-CLICK button, move the mouse control button until the mouse

pointer is over the desired location, then release the L-CLICK button.

● Using the computer’s page up [

↑

] and down [

↓

] function

Press the PAGE+ and PAGE- buttons to switch PowerPoint

slides.

The remote control may fail to operate

if the mouse remote control receiver is

exposed to bright sunlight or

fluorescent lighting.

In such a case, change position or

direction of the mouse remote control

receiver and retry.

Mouse control

Remote Control Front Remote Control Rear

PAGE –

PAGE +

R-CLICK

L-CLICK

Projection Distance and Size

Use the figures, tables, and formulas below to determine the projection size and projection

distance. (Projection sizes are approximate values for full-size picture with no keystone

adjustment.)

Screen

As seen from above

As seen from the side

90°

Lens center

a (min length) =

projection size (inches) – 1.0437

26.957

a (max length) =

projection size (inches) – 0.6246

16.749

a is the distance (m) between the lens and the screen, and

corresponds to a range of 1.07 m to 11.09 m.

projection

projection distance a (m)

min length max length

size (inches)

(zooming max) (zooming min)

30 1.07 1.75

40 1.45 2.35

60 2.19 3.55

80 2.93 4.74

100 3.67 5.93

150 5.53 8.92

200 7.38

–

250 9.24

–

300 11.09

–

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Comments to this Manuals

No comments

Toshiba TDP-TW100 User Manual Page 11

Comments to this Manuals

Related products and manuals for Projectors Toshiba TDP-TW100