Toshiba EL933 User Manual download pdf (Page 16)

English

Connecting an HDMI or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an

HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-

rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top

box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 22.

NOTE:

• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the

adoption of a new standard.

• Supported Audio format: Linear PCM and Dolby Digital, sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) from the device to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo

(

• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates

greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work

properly with this mode.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required

(see illustration).

HDMI

cable

HDMI device

HDMI out

(not supplied)

For 32AV93*B | 32/40LV93*B

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

No comments

Toshiba EL933 User Manual Page 16